Extraction Type Gas Detector Head with Display PD-12 series
-
-
- Model
- PD-12 series
- Gas Detected
- Combustible gas, toxic gas, etc.
- Display
- 4-digit digital LED display
- Power Supply
- 24 VDC (18 to 30 VDC)
Extraction type gas detector with display and alarm. Easy to replace its sensor unit.
Features
- Small and lightweight with concentration and alarm display
- Extraction type with hydrogen explosion proof (Ex d IIB + H2 T4X)
- Detecting decreased flow rate function except PD-12C (option)
- Environmental friendly product
- Water and dust-proof construction (Degree of protection: IP65)
Specifications
Model | PD-12A | PD-12B | PD-12C |
Detection Principle | Hot wire semiconductor | Catalytic combustion | Thermal conductivity |
Gas Detected | As per specifications | ||
Sampling Method | As per specifications | ||
Suction Flow | Over 0.5L/min | ||
Detection Range | As per specifications | ||
Alarm Set Value | As per specifications | ||
Alarm Accuracy | Combustible gas: ±25% of alarm set value under identical conditions Toxic gas: ±30% of alarm set value under identical conditions |
||
Alarm Delay | Combustible gas: Within 30 seconds with 1.6 times of alarm set conditions Toxic gas: Within 60 seconds with 1.6 times of alarm set concentration |
||
Alarms | Gas alarm: Red LED lamp flashes Trouble alarm: Yellow LED lamp flashes (sensor disconnection, sensor zero drop,power supply voltage error, etc.) |
||
Display | Four-digit digital LED display | ||
Output | Gas concentration analog signal ・4-20mADC (common to the negative side of power supply) Gas alarm contact or failure contact*1 (one stage only) ・1a no-voltage contact output, Non-latching ・Rated load: 0.5A at 250VAC or 0.5A at 30VDC (resistance load) |
||
Operation | At 4 points of magnetic switches | ||
Explosion-proof | II 2G Ex d IIB + H2 T4 Gb (ATEX)*2 Ex d IIB + H2 T4 X (Japan EX) |
||
Degree of Protection | IP65 | ||
Applicable Cable | Cable outer diameter: 10.5mm to 14.5mm 6-conductor shielded cable: CVV-S 1.25mm2 or 2.0mm2 |
||
Operating Temperature/Humidity*3 |
-10 to +50 °C 10 to 90 %RH (0 to 50 °C) |
||
Power Supply | 24 VDC (±20%) | ||
Power Consumption | 7.5W max. | ||
Dimensions | W133 x H260 x D132 mm (excluding protrusions) | ||
Weight | Approx. 5.2kg |
*1 Gas alarm contact is a standard issue. Please specify if you wish a failure contact.
*2 Some are not ATEX approved. For further information, please ask.
*3 No radical temperature or humidity changes and no condensing.
Connectable Alarm Units
Approvals
- CE marking
- UKCA
- IECEx
- ATEX
- ANZEX
- China Ex (NEPSI)
- Korea Ex (KOSHA)*
- India Ex (PESO)
- Taiwan Ex (ITLI)
- Japan Ex
*Only PD-12A/B