Personal Oxygen Monitor XO-2200
- Gas Detected
- Detection Principle
- Galvanic cell
- Sampling Method
- Approx. 75g (including battery)
Pocket-sized personal oxygen monitor.
- For safety check by wearing in tank, manhole, tunnel construction, hold and bottom etc.
- For safety of site workers.
- Can be used continuously for 5000 hours.
- Available with loud buzzer, alarm lamp from 4 dimensions, peak hold function.
- Thin, lightweight design.
|Detection Principle||Galvanic cell|
|0 to 25 vol%
(25 to 50 vol%)
|Indication Accuracy*1||Within ±0.5vol%|
|Alarm Set Value||1st stage: 19.5vol%
2nd stage: 18.0vol%
|Response Time*2||20s or less|
|Display Mode||LCD (Manual backlight)|
|Alarm Mode||Buzzer sounds, flashing red light, vibrator|
|Approvals||Ex ib IIB T3 (TIIS)|
|Function||Remaining battery level, peak hold, memory of peak value,
alarm functions except gas alarm (sensor malfunction, remaining
battery level, air-adjustment malfunction)
|Operation Temperature||-10 to +40 °C, 30 to 90 %RH (non-condensing)|
|Operation Air Pressure||Air pressure ±10%|
|Power Source||1 x AAA alkaline dry cell (LR 03)|
|Battery Life*3||Up to 5000 hours (at 20°C without alarm)|
|Dimensions||W65 x H64 x D22 mm (excluding protrusions)|
|Weight||Approx. 75g (including batteries)|
|Standard Accessories||1 x AAA alkaline dry cell, 1 x safety pin adaptor (with fixing screw)|
*1 Under identical measuring conditions.
*2 Assuming 90% response and operating at 20 ±2°C.
*3 Battery life may vary with ambient conditions, conditions of use, storage period, battery manufactures, etc.
Type Approved by TIIS Explosion-proof certification